While most orders continue to ship on time, some orders are currently taking longer than expected due to supply chain issues outside of our control.

Largest Inventory of Lockers in the Nation - New & Used Lockers

You can add only four products to the comparison list.

How to Assemble a Kids Stadium Locker

Buying one of our Kids Stadium Lockers as a gift and having it shipped unassembled? Chances are you might need a little bit of help putting it together. Your purchase should include assembly instructions, but just in case yours get misplaced (or you just need some additional help), we’ve got your back. :) Read on for 12 easy steps and get your Kids Stadium Locker put together in no time!

Before you start putting your locker together, find a location that has plenty of space (a living room, garage, shed, etc.) so you have enough room to lie out and organize all of the locker pieces. You’ll need a 3/8” wrench for assembly.

Step 1: Place the back panel on a flat surface or pair of sawhorses to make it easier to assemble.

Screenshot 2015-12-14 16.46.19

Step 2: Bolt the left side panel to the inside of the back flange. The pre-drilled holes should line up on both sides.

Screenshot 2015-12-14 16.46.32

Step 3: Bolt the top panel to the inside of the left-side panel and inside of the back panel.

Screenshot 2015-12-14 16.46.52

Step 4: Bolt the shelf panel to the inside of the left-side panel and inside of the back panel.

Screenshot 2015-12-14 16.47.18

The shelf panel should have a number plate on the front.

Screenshot 2015-12-14 16.47.25

Step 5: Install one of the rod holders below the shelf panel.

Screenshot 2015-12-14 16.47.39

Screenshot 2015-12-14 16.47.44

Step 6: Bolt the remaining side panel to the inside of the back flange. Again, the pre-drilled holes should line up correctly.

Screenshot 2015-12-14 16.47.57

Step 7: Attach the two side mounts to the insides of both side panels.

Screenshot 2015-12-14 16.48.10

Screenshot 2015-12-14 16.48.18

Step 8: Bolt the footlocker panel to the two side mounts, allowing the panel to open and close.

Screenshot 2015-12-14 16.48.39

Screenshot 2015-12-14 16.48.55

Step 9: Install the second rod holder to the side panel below the shelf panel.

Screenshot 2015-12-14 16.49.13

Step 10: Bolt the bottom panel to the inside panels.

Screenshot 2015-12-14 16.49.40

Step 11: Place the locker frame over the outside edge of the two side panels and bolt together, making sure that the pre-drilled holes line up.

Screenshot 2015-12-14 16.49.50

Step 12: Stand your locker upright on a flat, level surface and tighten any remaining bolts.

Screenshot 2015-12-14 16.50.09

And it’s as easy as that. ;) Now the little sports fan in your life can start using his or her Kids Stadium Locker to store sports equipment, trophies, bags, hats, jerseys and more for years to come!

*We strongly encourage anchoring your locker to the wall or floor for added safety.*


Check out our instructional video below as an additional resource in assembling your Kids Stadium Locker.

https://youtu.be/Uc9B0MOGALk