Military Locker / Police Locker for Turnout Gear

The Right Locker for the Right Job

The key to any turnout locker is the ability to grab and go when the call comes in. Our heavy duty turnout lockers are popular as military lockers or police lockers and are also the answer for fire fighters, hazmat, ems or flight preparedness personnel that need quick access to their gear at a moment's notice. The protective equipment used by many emergency responder personnel needs to be ready for deployment at all times. More importantly, the proper storage of that equipment cannot only make a difference in how long it lasts but also how well it protects. The open front turnout locker makes readiness a reality by allowing PPE to hang freely in the open body of the locker while still providing seating and lockable bulk storage in the foot locker. As a flight locker, our turnout locker provides ample space for a helmet and other items on the upper shelf. The hanging area underneath can be outfitted with an optional heavy duty parachute rack or additional 7/8" wide wall hooks that can accommodate flight harnesses or survival vests. Multiple available locker accessories let you design your turnout locker with as much or as little as it needs to get the job done. And if you’re struggling with a room layout with limited space, the turnout models can be fitted with a center divider and two coat rods to accommodate two users per locker.

This unit includes (as pictured)

1. Top Shelf
2. Foot Locker
3. Coat Rod

Key Features:

• Heavy Duty Lockers:  All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
• Foot Locker:  The reinforced lid of the foot locker features a continuous hinge and also serves as a seat. The front panel includes a single point latch with padlock strike plate and mini louvers for security and ventilation
• Locker Body:  Sides, Bottoms, Tops, and Shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12 inch centers
• Backs:  Solid 18-gauge steel
• Sides:  16-gauge sheet steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
• Tops and Bottoms:  Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
• Frame:  Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
• Assembly Hardware:  Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
• Interior Equipment Shelf:  16-gauge full width located approximately 12" (304.8 mm) below top of locker
• Hooks and Coat Rod:  Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
• Powder Coat:  Dry thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
• Color:  21 color choices; call for two-tone paint
• Door Handles and Cremone Latching:  Heavy duty turn handle secures the door at three points. The top and bottom frames are engaged with 3/8" (9.5 mm) steel rods, and a 1/8" (3 mm) thick center latch engages at the side. Double doors have a left hinged door secured its full length by the right hinged door when latched. Handles are secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary
• Single Point Latch:  24” wide single door only. Recessed handle with integral pull and 11-gauge 
• Multiple Point Latch:  24” wide single door only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking

Additional available options: (call 1-877-952-0151 today!)

Document Sleeve	Cell Phone/Key Tray	Accessory Mounting Panel	Garment Separator

• Cell Phone/Key Tray:  The 8” x 2” x 2” tray is sized for organizing phones, radios or keys and can be attached to the optional center divider or to the door using the accessory mounting panel
• Hardwood Seat:  Used in place of a foot locker or drawers, the 1-1/4” thick full hardwood bench provides a sturdy seating surface with open storage underneath for stowing equipment 
• Document Sleeve:  Formed from 16-gauge steel, the document sleeve is available in either a vertical or horizontal configuration for efficient storage of portfolios, note pads or binders
• Garment Separator:  The 16-gauge steel channel attaches underneath the top shelf and uses diamond perforations to keep hangers from bunching together for improved ventilation
• Drawer Unit:  Mounted within the confines of the locker body, the steel drawer features full extension glides for easy access to files or equipment without taking up valuable space when not in use. The ball-bearing glides are rated at 250 lb. capacity for performance and durability
• Parachute Rack:  Formed from 3/4" diameter, heavy wall steel tube and reinforced by 14-gauge gussets and supports for hanging heavy flight gear or body armor. Ordering this option replaces the standard heavy duty rear-mounted coat hooks
• Boot Tray:  The 12” x 14” boot tray provides air space between soiled or wet footwear and the shelf or locker bottom. A series of round perforations are used to promote air flow, and the tray is kept from marring the locker finish by rubber pads
• Accessory Mounting Panel:  A 24" high panel formed from 16-gauge steel permits mounting several accessories to the door without drilling or using exposed fasteners
• Additional Locker Accessories:  Standard locker accessories such as vertical fillers, continuous slope hoods, locker room benches and recess trim are available for use on turnout lockers 
• Security Box:  Available in either 15” or 24” wide configurations, the security box uses a 14-gauge lockable door and a 16-gauge side panel and welded door frame to properly secure valuable equipment and personal items. The 24” model includes a full width shelf to double the usable storage area. Any standard box locker padlock or built-in lock can be used to secure the contents
• Center Divider:  Center divider allows you to split your storage between uniforms or PPE and civilian clothing storage for more flexibility
• Half Shelves:  Combine several half shelves with a divider and locking compartment

Color Chart