Locker accessories available include continuous sloped tops, continuous inset metal bases, integral channel bases, filler panels, finished end panels, closures and trim panels to complete your perfect school gym or locker room. There are no limits to what we offer when it comes to school gym lockers. Check out the many options available below then give us a call to discuss your custom school gym lockers today!
Unit slope tops cover the width of one locker frame only. Lockers with unit slope tops have sides with mitered top ends with a rise equal to 1/3 of the locker depth, plus longer backs that meet the rear edge of the slope top. Unit slope tops are used in place of the standard flat tops. Order the appropriate locker plus the proper slope top size. (Not for use on our Athletic Ventilated or All- Welded lockers).
Continuous slope hoods fit on top of flat top lockers. They can be used on new lockers or on a retrofit basis. All hoods are furnished in 72" lengths and must be cut to length during installation. Intermediate splices, ends and rear supports (two per hood) complete the installation, and must be ordered separately. Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as storage areas. There are three different types of slope top construction: Unit Slope Tops, Slope Hoods, and Slope Top Kits. Each is explained below.
Zee bases raise lockers without legs 4" off the floor when there is no concrete or wood base. They provide a toe space in the front and a concealed flange for floor anchoring at the rear. A special 4" high rear leg can be ordered to simplify installation. (6" high zee bases are available also.) Zee bases are available only in 72" lengths, and may need to be cut to fit at the time of installation. Splices/End Bases are used at ends of rows, and where the front sections join. (Not for use on Welded lockers.)