While most orders continue to ship on time, some orders are currently taking longer than expected due to supply chain issues outside of our control.

Largest Inventory of Lockers in the Nation - New & Used Lockers

You can add only four products to the comparison list.

Gear Locker with Security Box and Drawer

  • Gear Locker with Security Box and Drawer

Gear Locker with Security Box and Drawer  

SKU: PAT-P
  • Assempbly Required
  • Made In Usa
  • Ships By Truck

You can add only four products to the comparison list.

$1,563.95

Available in 21 colors and 4 sizes welded or not welded. Ship within 8 to 10 weeks unassembled. Custom options available per request.

* Required Fields

$1,563.95

You can add only four products to the comparison list.

Description

The Right Locker for the Right Job

Our gear locker with security box and drawer adds a new twist to the standard locker by introducing a storage drawer that fits inside the locker. This design frees up valuable floor space in front of the locker when the drawer is not in use and features vertical dividers that permit you to create compartments or just use the drawer to stow bulky items like shoes or patrol bags. The drawer system features an integral full-width pull and heavy duty ball-bearing glides. To save room in tight quarters, combine the drawers with an available seat to open up the area in front of the lockers. The range of locker widths and accessories for gear lockers makes planning lockers for any line of security or emergency service easy. The featured locker has a 12" wide security compartment that has room for everything from toiletries to pepper spray, and with its full shelf you can still stow a citation book, binder, clipboard and file folders. An available clothing separator spaces uniforms, jackets and ballistic vests for better air circulation. Two different sizes of storage compartments, available drawers, heavy duty hooks and a sheet metal document pocket can be added to organize your gear for the next patrol.

This unit includes:

  • 15" deep top shelf
  • Center partition
  • Full bottom shelf
  • 12" wide security box
  • Bottom drawer unit
  • 2 drawer dividers
  • 2 half shelves
  • Coat rod
  • Double doors
  • Mirror
  • Cell phone tray

Key Features
  • Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
  • Locker Body: Sides, bottoms, tops, and shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12" centers
  • Backs: Solid 18-gauge steel
  • Sides: 16-gauge sheet steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
  • Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
  • Frame: Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
  • Assembly Hardware: Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
  • Interior Equipment Shelf: 16-gauge full width located approximately 12" (304.8 mm) below top of locker
  • Interior Security Box: Measures 12" wide. Accepts padlocks or built-in style locker locks
  • Hooks and Coat Rod: Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
  • Powder Coat: Dry Thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
  • Color: 21 color choices; call for two-tone color options
  • Door Handles and Cremone Latching: Heavy duty turn handle secures the door at three points. The top and bottom frames are engaged with 3/8" (9.5 mm) steel rods, and a 1/8" (3 mm) thick center latch engages at the side. Double doors have a left hinged door secured its full length by the right hinged door when latched. Handle is secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies are not accepted

Easy ordering online or call 1-877-952-0151 to order today!!
SKU PAT-P
Color See Chart
Note *In the interest of safety, SchoolLockers.com highly recommends floor and/or wall anchoring lockers to prevent tipping or injury.

Product Attachments

View FilePenco Color Chart    Size: (580.54 KB)

You may also be interested in the following product(s)