Gear Locker with Center Partition  

The Right Locker for the Right Job

A properly equipped double door gear locker with center partition can be the ideal solution for a variety of specialized storage challenges. The ample storage areas at both top and bottom still leaves almost 4 feet between the shelves for hanging uniforms and other gear. The double door format means even the widest lockers have manageable doors that require half as much floor space as a single door to open. The heavy duty turn handle is made from a 3/16" thick steel strap and accepts a padlock. When turned, it engages the top and bottom frame members with a pair of 3/8" diameter steel locking rods. In addition to the cell phone tray and document sleeve included in this model, you can customize the locker with additional options such as a second coat rod, extra hooks or a clothing separator for expanded garment storage. Call for details.

This unit includes:

• Full width top shelf
• Center partition
• Full bottom shelf for a lower storage area
• Coat Rod
• Diamond perforated double doors
• Document sleeve
• Cell phone tray

• Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
• Locker Body: Sides, bottoms, tops, and shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12" centers
• Backs: Solid 18-gauge steel
• Sides: 16-gauge steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
• Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
• Frame: Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
• Assembly Hardware: Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
• Interior Equipment Shelf: 16-gauge full width located approximately 12" (304.8 mm) below top of locker
• Hooks and Coat Rod: Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
• Powder Coat: Dry Thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
• Color: 21 color choices
• Door Handles and Cremone Latching: Heavy duty turn handle secures the door at three points. The top and bottom frames are engaged with 3/8" (9.5 mm) steel rods, and a 1/8" (3 mm) thick center latch engages at the side. Double doors have a left hinged door secured its full length by the right hinged door when latched. Handle is secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies are not accepted