The Right Locker for the Right Job
A properly equipped double door gear locker with center partition can be the ideal solution for a variety of specialized storage challenges. The ample storage areas at both top and bottom of the 36" wide model still leaves almost 4 feet between the shelves for hanging uniforms and other gear. The double door format means even the widest lockers have manageable doors that require half as much floor space as a single door to open. The heavy duty turn handle is made from a 3/16" thick steel strap and accepts a padlock. When turned, it engages the top and bottom frame members with a pair of 3/8" diameter steel locking rods. In addition to the mirror and cell phone tray, you can outfit the locker with a second coat rod, extra hooks or a clothing separator for expanded garment storage. Our optional 12" wide security compartment is perfect for personal items, while the 24" version includes a full width horizontal shelf that doubles the useable space so you can secure your laptop and still have room for files or binders.
This unit includes (as pictured):
Key Features
- Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
- Locker Body: Sides, bottoms, tops, and shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12" centers
- Backs: Solid 18-gauge steel
- Sides: 16-gauge sheet steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
- Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
- Frame: Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
- Assembly Hardware: Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
- Interior Equipment Shelf: 16-gauge full width located approximately 12" (304.8 mm) below top of locker
- Hooks and Coat Rod: Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
- Powder Coat: Dry Thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
- Color: 21 color choices
- Door Handles and Cremone Latching: Heavy duty turn handle secures the door at three points. The top and bottom frames are engaged with 3/8" (9.5 mm) steel rods, and a 1/8" (3 mm) thick center latch engages at the side. Double doors have a left hinged door secured its full length by the right hinged door when latched. Handle is secured to door using a threaded lock nut to facilitate adjustment and removal for repair if necessary. Welded handle assemblies are not accepted
- Single Point Latch: 24" wide single door only. Recessed handle with integral pull and 11-gauge steel hasp welded to locker frame
- Multiple Point Latch: 24" wide single door only. Recess finger-lift control handle in door, positive automatic type latching, whereby locker may be locked when open, then closed without unlocking
Easy ordering online or call 1-877-952-0151 to order today!!
SKU | PAT-M |
---|---|
Color | See Chart. |
Note | *In the interest of safety, SchoolLockers.com highly recommends floor and/or wall anchoring lockers to prevent tipping or injury. |
You may also be interested in the following product(s)
-
$868.95
-
$442.95
-
$371.95
-
$1,463.95