Largest Inventory of Lockers in the Nation - New & Used Lockers

You can add only four products to the comparison list.

Wide Turnout Locker with Center Partition and Security Box

  • Wide Turnout Locker with Center Partition and Security Box

Turnout Locker with Center Partition and Security Box  

  • Assempbly Required
  • Made In Usa
  • Ships By Truck

You can add only four products to the comparison list.


Available in 21 colors and 5 sizes welded or not welded. Ship within 8 to 9 weeks unassembled. Custom option available per request.

* Required Fields


You can add only four products to the comparison list.


The Right Locker for the Right Job

Whether you need maximum security for mission critical equipment, optimum ventilation for uniforms and outerwear with a minimum of lockable personal storage, or a combination of both, our turnout locker with center partition and 24" security box delivers. All models are equipped with a sturdy full width shelf located 12" below the top to provide ample storage for protective head gear. A chrome plated 1" diameter coat rod and heavy duty coat hooks ensure exceptional hanging capacity below. Adding a center divider allows you to split your storage between uniforms or PPE and civilian clothing storage. For more flexibility, combine several half shelves with a divider and locking compartment and you'll have plenty of room to lock up your laptop, side arm, and personal items like a billfold, cell phone and keys. When your gear or equipment cases are best protected when stowed horizontally, or you just need general purpose high density storage, substituting 4 full width shelves for the divider gives you a total of six levels for boxes, binders or packaged supplies. The 36" wide turnout unit pictured is configured for multi-purpose storage, with free access to tactical gear and a lockable compartment for personal items. The sides are ventilated for air flow, but solid at top and bottom for added strength.

This unit includes (as pictured)

  • 12" Wide security Box
  • 15" Deep top shelf
  • 3 Half Shelves
  • Center Partition
  • Coat Rod

  • Key Features
    • Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
    • Locker Body: Sides, bottoms, tops, and shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12" centers
    • Backs: Solid 18-gauge steel
    • Sides: 16-gauge sheet steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
    • Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
    • Frame: Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
    • Assembly Hardware: Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
    • Interior Equipment Shelf: 16-gauge full width located approximately 12" (304.8 mm) below top of locker
    • Hooks and Coat Rod: Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
    • Powder Coat: Dry Thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
    • Color: 21 color choices, call for two-tone paint

    Easy ordering online or call 1-877-952-0151 to order today!!
    SalesPad Product Group Number N/A
    Color See Chart
    Note *In the interest of safety, highly recommends floor and/or wall anchoring lockers to prevent tipping or injury.
    Display Message: Unlimited locker colors available! Call # N/A

    You may also be interested in the following product(s)

    Copyright ©, All Rights Reserved.