The Right Locker for the Right Job
Whether you need maximum security for mission critical equipment, optimum ventilation for uniforms and outerwear with a minimum of lockable personal storage, or a combination of both, our turnout locker with center partition and 12" security box delivers. All models are equipped with a sturdy full width shelf located 12" below the top to provide ample storage for protective head gear. A chrome plated 1" diameter coat rod and heavy duty coat hooks ensure exceptional hanging capacity below. Adding a center divider allows you to split your storage between uniforms or PPE and civilian clothing storage. For more flexibility, combine several half shelves with a divider and locking compartment and you'll have plenty of room to lock up your laptop, side arm, and personal items like a billfold, cell phone and keys. When your gear or equipment cases are best protected when stowed horizontally, or you just need general purpose high density storage, substituting 4 full width shelves for the divider gives you a total of six levels for boxes, binders or packaged supplies. The 36" wide turnout unit pictured is configured for multi-purpose storage, with free access to tactical gear and a lockable compartment for personal items. The sides are ventilated for air flow, but solid at top and bottom for added strength.
This unit includes:
- 12" Wide Security Box
- 15" Deep Top Shelf
- 3 Half Shelves
- Center Partition
- Coat Rod
Key Features
- Heavy Duty Lockers: All locker body components made of cold rolled steel specially formed for added strength and rigidity and to ensure tight joints at fastening points
- Locker Body: Sides, bottoms, tops, and shelves: 16-gauge steel. Sides punched for shelf locations on nominal 12" centers
- Backs: Solid 18-gauge steel
- Sides: 16-gauge sheet steel with 3/4" (19mm) wide by 1-1/2" (38mm) high diamond-shaped perforations. Optional: solid sides without ventilation
- Tops and Bottoms: Three sides formed 90 degrees, the front offset formed to be flush with horizontal frame member
- Frame: Vertical frame member to be not less than 16-gauge formed to a channel shape and hemmed to create a smooth interior edge. Intermembering parts to be mortised and tenoned and electrically welded together in a rigid assembly capable of resisting strains. Hole spacing in locker body construction does not exceed 9" (225 mm)
- Assembly Hardware: Zinc plated truss fin head bolts and hex nuts; optional factory assembly of locker bodies using rivets
- Interior Equipment Shelf: 16-gauge full width located approximately 12" (304.8 mm) below top of locker
- Interior Security Box: Measures 12" wide. Accepts padlocks or built-in style locker locks
- Hooks and Coat Rod: Two heavy duty 3" high x 7/8" wide x 2-1/2" deep single-prong wall hooks and one chrome plated 1" diameter coat rod
- Powder Coat: Dry Thickness: 1 to 1.2 mils (0.025 to 0.03 mm)
- Color: 21 color choices, call for two-tone paint
Easy ordering online or call 1-877-952-0151 to order today!!
SKU | PAT-C |
---|---|
Color | See Chart |
Note | *In the interest of safety, SchoolLockers.com highly recommends floor and/or wall anchoring lockers to prevent tipping or injury. |
You may also be interested in the following product(s)
-
$1,118.95
-
$3,378.95
-
$442.95
-
$371.95